myITforum.com Community Forum myITforum.com Community Forum

Home  Forums  Blogs  Live Support chat  Search Articles  Wiki  FAQ  Email Lists  Register  Login  My Profile  Inbox  Address Book  My Subscription  My Forums 

Photo Gallery  Member List  Search  Calendars  FAQ  Ticket List  Log Out

All Forums RSS Feed Subscription:


  


NIC Driver Missing After Applying Image

 
View related threads: (in this forum | in all forums)

Logged in as: Guest
  Printable Version
All Forums >> [Management Products] >> System Center Products >> System Center Configuration Manager >> NIC Driver Missing After Applying Image Page: [1]
Login
Message << Older Topic   Newer Topic >>
NIC Driver Missing After Applying Image - 7/9/2008 6:22:51 PM   
nrunge

 

Posts: 50
Score: 0
Joined: 5/20/2008
Status: offline 		We are migrating from Altiris to SCCM. I have never used SMS before now. I captured an image for each machine in our environment just to test SCCM and not allow HAL's or driver issues congest the possible troubleshooting process. When I captured the image from each of the six types of PC's that we have there was a network card driver installed. Now after the image is applied none of the computers have a NIC driver installed.

Not only should that driver be part of the image itself but I have also created a driver package containing all of our NIC drivers so I am a bit confused as to why this driver is not being installed (or being stripped out).

I noticed this same behavior when a computer that I captured an image from ran through mini-setup. I have a feeling that I might not be understanding something about how Sysprep is used in conjuction with SCCM.

Previously we had a custom sysprep answer file. It really didn't do much, just put in the key and join the PC to the proper domain to allow for a lighter touch setup process.

Now with SCCM I was made to beleive that SCCM creates the answer file on the fly and that all I needed to copy to the root of C:\ was a stock Sysprep folder with no customizations done. So I never ran through setupmgr.exe to generate an inf file.

Obviously I am misunderstanding something here about creating an image with SCCM, Sysprep and specifically driver installation via SCCM. I would appreciate it if someone could tell me what I am doing wrong.
Post #: 1
RE: NIC Driver Missing After Applying Image - 7/9/2008 8:40:08 PM   
ScottGill

 

Posts: 31
Score: 0
Joined: 3/1/2007
Status: offline 		From what I've seen the drivers are apparently stripped out of the Image before being captured (happened to me also).  But I was able to resolve it just by grabbing the latest NIC Drivers and adding them into the driver system and to the driver package.  Make sure your drivers package is distributed out to all of your DP's, they're all enabled, and there is a task in the task sequence to install drivers.  Also the install driver task should be set to "Consider drivers from all categories".

(in reply to nrunge)
Post #: 2
RE: NIC Driver Missing After Applying Image - 7/10/2008 9:10:03 AM   
wbracken


Posts: 1006
Score: 22
Joined: 4/12/2002
From: St. Louis
Status: offline 		I highly recommend downloading and using the Microsoft Deployment Toolkit 2008:
http://www.microsoft.com/downloads/details.aspx?familyid=3bd8561f-77ac-4400-a0c1-fe871c461a89&displaylang=en&Hash=CTCYTF303UPtbk9SBExUBjRNj77a8Ad5daL5yRQLODtoT9UD%2fEpmwynSFaQ5Ff6Y2mKgOP2uQxXfF6qZT2BYgg%3d%3d#filelist

This will simplify most of the basics for creating/capturing and deploying an image.  I personally will never leave home without it.  ;)

_____________________________

William Bracken

http://www.clientarchitect.com

(in reply to ScottGill)
Post #: 3
RE: NIC Driver Missing After Applying Image - 7/10/2008 9:47:27 AM   
nrunge

 

Posts: 50
Score: 0
Joined: 5/20/2008
Status: offline 		ScotGill:
The driver packages have an "Installed" state under package status and I can browse to our DP in the SMSPKGD$ directory and locate them so I know that they are being copied to the DP's. The status is set to "Enabled" under the general tab for every driver and by default the wizard for the OSD task sequence added the "Apply Device Drivers". In that task I have it set to "Install all compatible drivers", "consider drivers from all categories" (every driver in each package has a category of some sorts assigned to it) and also "Do unattended installation of unsigned drivers on versions of Windows where this is allowed" is checked.

wbracken:
I actually have a previous topic started about that (http://www.myitforum.com/forums/MDT/m_182196/tm.htm). I now then am still confused as to how MDT complements SCCM. I set up MDT and went through some basic configuration and when I got to the OSD stuff it really felt exactly like the OSD section in SCCM so I stopped right there. I will go back and revisit the MDT. Regardless though it seems as if SCCM is not applying driver correctly. I am going to check DriverCatalog.log and MP_DriverManager.log to see what is going on there.


(in reply to wbracken)
Post #: 4
RE: NIC Driver Missing After Applying Image - 7/10/2008 10:54:43 AM   
nrunge

 

Posts: 50
Score: 0
Joined: 5/20/2008
Status: offline 		Update:

Here is a sample from those logs. Everything seems to look OK.

MP_DriverManager.log\ 
Executing Driver Request - Match MP_DriverManager 7/9/2008 3:02:45 PM 5100 (0x13EC)
Response message sent to the client MP_DriverManager 7/9/2008 3:02:46 PM 5100 (0x13EC)
Executing Driver Request - Match MP_DriverManager 7/9/2008 3:03:13 PM 5100 (0x13EC)
Response message sent to the client MP_DriverManager 7/9/2008 3:03:13 PM 5100 (0x13EC)
Executing Driver Request - Match MP_DriverManager 7/9/2008 3:07:18 PM 2168 (0x0878)
Response message sent to the client MP_DriverManager 7/9/2008 3:07:19 PM 2168 (0x0878)
Executing Driver Request - Match MP_DriverManager 7/9/2008 3:10:49 PM 5100 (0x13EC)
Response message sent to the client MP_DriverManager 7/9/2008 3:10:49 PM 5100 (0x13EC)
Executing Driver Request - Match MP_DriverManager 7/9/2008 3:16:21 PM 5100 (0x13EC)
Response message sent to the client MP_DriverManager 7/9/2008 3:16:22 PM 5100 (0x13EC)


DriverCatalog.log 
CreateFromINF("\\s-netapp01\imagevol01\Drivers\GX520\Chipset\extract", "852.inf") DriverCatalog 7/8/2008 12:03:39 PM 5516 (0x158C)
Initializing driver digest from '\\s-netapp01\imagevol01\Drivers\GX520\Chipset\extract\852.inf' DriverCatalog 7/8/2008 12:03:40 PM 5516 (0x158C)
Successfully initialized driver digest. DriverCatalog 7/8/2008 12:03:40 PM 5516 (0x158C)
Returning 1 driver definition. DriverCatalog 7/8/2008 12:03:40 PM 5516 (0x158C)
CreateFromINF("\\s-netapp01\imagevol01\Drivers\GX520\Chipset\extract", "855.inf") DriverCatalog 7/8/2008 12:03:44 PM 4360 (0x1108)
Initializing driver digest from '\\s-netapp01\imagevol01\Drivers\GX520\Chipset\extract\855.inf' DriverCatalog 7/8/2008 12:03:46 PM 4360 (0x1108)
Successfully initialized driver digest. DriverCatalog 7/8/2008 12:03:46 PM 4360 (0x1108)
Returning 1 driver definition. DriverCatalog 7/8/2008 12:03:46 PM 4360 (0x1108)
CreateFromINF("\\s-netapp01\imagevol01\Drivers\GX520\Chipset\extract", "865.inf") DriverCatalog 7/8/2008 12:03:51 PM 1444 (0x05A4)
Initializing driver digest from '\\s-netapp01\imagevol01\Drivers\GX520\Chipset\extract\865.inf' DriverCatalog 7/8/2008 12:03:52 PM 1444 (0x05A4)
Successfully initialized driver digest. DriverCatalog 7/8/2008 12:03:52 PM 1444 (0x05A4)
Returning 1 driver definition. DriverCatalog 7/8/2008 12:03:52 PM 1444 (0x05A4)



I am now going to try to add the "Apply Driver Package" task and point it to the NIC package that I made which contains network card drivers for all of the machines. I am leaving the "Apply Device Drivers" task in there as well because I figure it can't hurt.

< Message edited by nrunge -- 7/10/2008 10:55:13 AM >

(in reply to nrunge)
Post #: 5
RE: NIC Driver Missing After Applying Image - 7/10/2008 2:14:46 PM   
nrunge

 

Posts: 50
Score: 0
Joined: 5/20/2008
Status: offline 		Update:

So I think I am getting closer here. After adding the "Apply Driver Package" task to the sequence I was not able to start the image process from boot media. I opened up the log files on the client via the console in the PE environment and found this:

"Failed to find CCM_SoftwareDistribution object for AdvertID="P0120027" PackageID="P0100044"
 
P0100044 is the NIC drive package. It is in an "Installed" state on the DP and I can browse to the share and view the files from my PC. It looks like the permissions on the folder are the same as with other folders on that share. So I am close, but still stuck.

(in reply to nrunge)
Post #: 6
RE: NIC Driver Missing After Applying Image - 7/10/2008 2:51:39 PM   
wbracken


Posts: 1006
Score: 22
Joined: 4/12/2002
From: St. Louis
Status: offline 		Try updating the DP with a new package source version (basically to just increment the value to v2 or whatever the next verison would be)

_____________________________

William Bracken

http://www.clientarchitect.com

(in reply to nrunge)
Post #: 7
RE: NIC Driver Missing After Applying Image - 7/10/2008 2:53:25 PM   
nrunge

 

Posts: 50
Score: 0
Joined: 5/20/2008
Status: offline 		I did that and now the task sequence kicked off correctly. Why would that be?

(in reply to wbracken)
Post #: 8
RE: NIC Driver Missing After Applying Image - 7/10/2008 2:55:29 PM   
wbracken


Posts: 1006
Score: 22
Joined: 4/12/2002
From: St. Louis
Status: offline 		Not sure really.  I see it happen a lot in my lab.  Seems that v1 of many packages fail with a "cannot find source" type of error.  As soon as I refresh the DP it works fine.  I will eventually bring this up with Microsoft I just havent really had a chance to yet.  :)

_____________________________

William Bracken

http://www.clientarchitect.com

(in reply to nrunge)
Post #: 9
RE: NIC Driver Missing After Applying Image - 7/10/2008 2:56:47 PM   
nrunge

 

Posts: 50
Score: 0
Joined: 5/20/2008
Status: offline 		Hah! That is funny. I will soon find out if that fixes my network card installation issue.

(in reply to wbracken)
Post #: 10
Page:   [1]
All Forums >> [Management Products] >> System Center Products >> System Center Configuration Manager >> NIC Driver Missing After Applying Image Page: [1]
Jump to:





New Messages No New Messages
Hot Topic w/ New Messages Hot Topic w/o New Messages
Locked w/ New Messages Locked w/o New Messages
 Post New Thread
 Reply to Message
 Post New Poll
 Submit Vote
 Delete My Own Post
 Delete My Own Thread
 Rate Posts



  
Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI

0.234