USMT Configuration question (Full Version)

All Forums >> [Management Products] >> Operating System Deployment

Message

---

jwetmore -> USMT Configuration question (4/29/2008 1:50:53 PM) Using bdd2007, and trying to get usmt to work as its designed to do..  I have configured the CS.ini fields of UDshare, UserDataLocation, UDDIR.   When i run litetouch.vbs  none of those fields are populated in the deployment wizard.,  anyone know why this is so ? thanks in advance. Jared

---

eschloss -> RE: USMT Configuration question (4/29/2008 3:05:10 PM) Is is getting any other values from the CustomSettings.ini?

---

jwetmore -> RE: USMT Configuration question (4/29/2008 3:27:00 PM) yes, Its getting my domain info that is all in the cs.ini.

---

eschloss -> RE: USMT Configuration question (4/30/2008 7:29:53 AM) I checked mine and all I have specified is UserDataLocation.  If you specify UDShare and UDDir, it may be a little redundant to also specify UserDataLocation or vice versa.  try commenting out the UDShare and UDDir lines and see if it finds it.  Also look at the logs after ZTIGather runs and see if it is getting the values at all.

---

bkelly11 -> RE: USMT Configuration question (5/1/2008 2:22:07 PM) http://www.spa.its.uiowa.edu/ecm/imaging/BDD2007/UofI_Quick_Start_Guide_to_BDD_2007_Part_1.doc  I found this document for BDD helpful.  Particularly in Step1 section 8 it gives steps to fix a Bug in USMT 3.0 for XP when used with BDD.

---

Page: [1]

Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI

0.1875