Chipset drivers are not updating during build (Full Version)

All Forums >> [Management Products] >> Operating System Deployment

Message

---

jscott607 -> Chipset drivers are not updating during build (4/30/2008 10:03:29 AM) Hello All. The chipset drivers for our Dell GX520 were not updating. After a build, the generic IDE ATA\ATAPI controller drivers were present.  I downloaded the new drivers, added them to the Just In Time package, and redistributed the package to the distribution points. Now, when I do a build I still see the generic driver present. However, the correct drivers are located on C:\drivers\chipset. If I update the driver and browse to this folder, it updates. Any suggestions on why they are not upgrading during the build?

---

jscott607 -> RE: Chipset drivers are not updating during build (4/30/2008 12:26:08 PM) I did more digging and located the below. I started doing some digging. I found the below in setupapi.log. #I022 Found "PCI\CC_0101" in C:\WINDOWS\inf\mshdc.inf; Device: "Standard Dual Channel PCI IDE Controller"; Driver: "Standard Dual Channel PCI IDE Controller"; Provider: "Microsoft"; Mfg: "(Standard IDE ATA/ATAPI controllers)"; Section name: "pciide_Inst". [2006/09/11 10:03:49 280.1111 Driver Install] #-019 Searching for hardware ID(s): intel-27df,primary_ide_channel,*pnp0600 #-018 Searching for compatible ID(s): *pnp0600 #-199 Executing "C:\WINDOWS\system32\setup.exe" with command line: setup -newsetup #I022 Found "Primary_IDE_Channel" in C:\WINDOWS\inf\mshdc.inf; Device: "Primary IDE Channel"; Driver: "Primary IDE Channel"; Provider: "Microsoft"; Mfg: "(Standard IDE ATA/ATAPI controllers)"; Section name: "atapi_Inst_primary". #I023 Actual install section: [atapi_Inst_primary]. Rank: 0x00000001. Effective driver date: 07/01/2001. #I022 Found "*PNP0600" in C:\WINDOWS\inf\mshdc.inf; Device: "Standard IDE/ESDI Hard Disk Controller"; Driver: "Standard IDE/ESDI Hard Disk Controller"; Provider: "Microsoft"; Mfg: "(Standard IDE ATA/ATAPI controllers)"; Section name: "atapi_Inst". I also found this in sysprep_before.inf and sysprep_after.inf. primary_ide_channel=c:\Windows\inf\mshdc.inf secondary_ide_channel=c:\Windows\inf\mshdc.inf *pnp0600=c:\Windows\inf\mshdc.inf *azt0502=c:\Windows\inf\mshdc.inf Would changing the .inf to c:\drivers\chipset\ correct the problem? It appears to me they are using the Microsoft default driver. I have not worked with OSD for very long so this is a bit new to me.

---

rbennett806 -> RE: Chipset drivers are not updating during build (4/30/2008 10:12:44 PM) When you set up your reference machine, prior to syspreping and capturing it, do you delete the "C:\Windows\INF\oem*.inf and oem*.pnf files?

---

jscott607 -> RE: Chipset drivers are not updating during build (5/1/2008 8:49:37 AM) Thank you for the response. I took over OSD from someone that is no longer with the company. My guess is that they did not delete the files.

---

Page: [1]

Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI

0.34375